Ozone Self Stick Valve 90°

14,5019,50

Ozone self-stick valve for one-pump.

It is a one-pump valve used by Ozone on the strut or the leading edge. This valve is supplied to us by Ozone so it will be perfectly compatible with your bladder.

The perfect adhesive valve to replace the damaged or detached one.

With a self-stick surface width of 9 cm, 11 cm or 14 cm, you can easily cut the original valve and reposition the new one.

To choose the right size, it’s simple!

  • If your original one-pump valve comes off, take 9cm.
  • If you need to cut it to replace it, take 11 cm this will leave you more space.
  • If it is a new generation inflation / deflation valve (large), you will need a large sticker. You need 15cm.

We use the Tear-aid brand sticker. The strongest and most powerful adhesive on the market. You will throw your kite before the valves take off !!!

We use the Tear-aid brand sticker. The strongest and most powerful adhesive on the market. You will throw your kite before the valves take off !!!

  • If your original one-pump valve comes off, take 9cm.
  • If you need to cut it to replace it, take 11 cm this will leave you more space.
  • If it is a new generation inflation / deflation valve (large), you will need a large sticker. You need 15cm.

 

Les valves sont livrées avec un morceau de film polyurethane à mettre entre la valve et le boudin pour éviter le collage de la nouvelle valve sur la partie inférieure du boudin.

Il convient de nettoyer avec la surface de votre boudin avec de l’essence F, seul solvant non agressif et qui dégraisse correctement. Ne pas utiliser les patchs d’alcool car cela ne sert à rien.

L’essence F ou solvant F se trouve partout en grande surface.

Bonjour

We will find solution !

Contact Us

or